NEW, MORE PRECISE AUTOMATIC WATER DISPENSER

Description:

The automatic hot/cold water dispenser consists of two IP65-rated ABS housings (waterproof, airtight, and dustproof). These two housings are corrosion-resistant thanks to their composition.

The electronic control unit and the hydraulic unit are separate to prevent condensation on the components.

The two housings are connected using cables and cable glands (included).

The electronic control unit displays the water temperature, the volume in liters, the current cycle count, and includes an emergency stop button.

Technical Data:

The hydraulic control box has a 3/4'' male water inlet and outlet; a 230V 16A output for pump control. This control box can be equipped with a MEDANA type 304 stainless steel hydraulic water pump (sold separately), but it can also be installed using mains water pressure.

The control box displays the flow rate in liters from 0 to 999 liters, with the unit of measurement remaining the liter. It has a nominal flow rate of 1500 l/h with an accuracy of 1%* and can be mounted vertically.

For the cold water doser, the maximum water temperature is 30°C, and for the hot water model, the maximum temperature is 90°C. Both operate on a 230V power supply.

The control box measures 195 x 250 x 95 mm, and the hydraulic control box: 300 x 200 x 170 mm

(*Accuracy given for guidance purposes based on a flow rate of 40 L/min)

Available options:

Hot water version (90°C max)