NEW, MORE PRECISE AUTOMATIC WATER DISPENSER

Description:

The automatic cold/hot water dispenser is made up of 2 ABS IP65 enclosures (waterproof, airtight or dustproof). The composition of the two enclosures makes them impervious to corrosion.

The electronic control box and the hydraulic box are separated to avoid condensation on the components.

Cables and cable glands (supplied) are used to connect the boxes.

The control panel displays water temperature, liters, cycle count and an emergency stop button.

Technical data :

The hydraulic box has a 3/4'' male water inlet and outlet, and a 230 V 16 A outlet for pump control. This unit can be fitted with a MEDANA type 304 stainless steel hydraulic water pump, sold separately, but can also be installed on mains pressure.

On the control panel, metering is by liter from 0 to 999 liters with a metering unit that will remain the liter with a nominal flow rate of 1500 l/h with an accuracy of 1%* and can be mounted in a vertical position.

For the cold water dispenser, the maximum temperature for water passage is 30°C, and for the hot water model, the maximum temperature is 90°C. Both are powered by 230V.

The control box measures 195 x 250 x 95 mm and the hydraulic box 300 x 200 x 170 mm.

(*Precision given for information only, based on a flow rate of 40L/min)

Possible choices :

Cold water version (max. 30°C)