MOTEUR VN25 UNIVERSEL

5 different mounting options: 3 M4 tapped holes at 120° on a 72 mm diameter hole on the rear flange with locking guides. 3 M4 tapped holes at 120° on a 72 mm diameter hole on the front flange. 4 M4 threaded rods on the shaft side for ferrule mounting. 2 M4 screws with 26 mm spacing for attaching a support foot. 2 M4 screws with 18 mm spacing for attaching a support foot. Power: 25 W (95 W input). Speed: 1300 RPM. Cable: 0.50 m. Rotation direction: counterclockwise.

Power: 25 W (95 W input). Speed: 1300 RPM. Cable: 0.50 m. Rotation direction: counterclockwise.

380 V